EVAPORATORS
EVAPORATORS
This range of cubic unit coolers has been designed for commercial chilling and freezing applications
Technical Features
Finned coils:
Constructed using copper tubes, and aluminum corrugated fins.
The arrangement of the copper tubes across self-spaced fins, the accurate link between tubes and fins as well as the use of corrugated fins allow our finned coils to reach high performance.
Every coil has been subjected to a leakage test under a rated pressure of 3000 kpa and then pressurized using nitrogen at 1000 kpa in order to avoid the corrosion of the inner surface of the copper tubes.
Casework:
The case structure of the unit cooler is fabricated from galvanized steel; its external surface is epoxy-polyester painted and then baked and cured at 180 ºC giving it a high protection against corrosion even in extreme environmental conditions; moreover this casing allows to meet more demanding food hygiene standards. Includes double drip tray to make the drainage of the water (resulting from defrost) easier.
For better maintenance, drip tray and end plates are readily dismounted from the casework giving an easy and fast access to the inside of the unit cooler.
Electric defrost:
Electric heaters are included in all freezing and chilling evaporators. They are shielded by a stainless steel tube and their terminals are vulcanized over it to avoid electric shunts; every heater includes a single ground wire. They are strategically located across the finned coil in order to provide suitable and uniform defrosting
© Copyright Tad Center @ 2025 All Rights Reserved
Loading...